To meet the requirement of the network system to the power, Santakups has developed a new generation UPS - Bpro offline series. It adopts 32bits data-bus microprocessor with robust processing power that is capable of detecting and controlling quickly and accurately all movement of UPS to ensure product high reliability. Owe to the use of the double-conversion circuit design, the power used by load is the pure sine wave power by stabilizing voltage and stabilizing frequency and noisy signals filter.

Furthermore, Bpro series UPS is specially designed for users of advanced workstations and network nodes. Moreover, it achieves the intelligent functions such time self-inspection, automatic disk-saving, automatic time switch ON/OFF and automatic power status recordation, etc, so it achieves the zero distance of communication between user and UPS. When utility power is disconnected, UPS informs the server immediately and gets ready to be switched off and automatically saves all data before performing the normal switch-off instruction. Even in an unattended network environment, UPS can ensure data safety of the network system. Specification： Model B500A/600A B1000A/1200A Max capacity(VA) 500VA(300W) 1000VA(600W) Rated capacity 600VA(360W) 1200VA(720W) Input Commerical power range 145VAC-280VAC AVR range 165VAC-270VAC Frequency 50Hz±10% Output Commerical power Sine-wave Inversion Simulated sine-wave Frequency Commercial power supply:shared frequency with the commercial inversion state:50Hz±0.5 AVR voltage range 220VAC±10%(Auto-sensing) Transfer time Typical:5ms(Including detection time) Protection Overload UPS automatically shutdown if overload exceeds 150% of normal value for 30 seconds and 180% for 3 seconds TEL/FAX/MODEM No Short circuit UPS Output is cut off immediately or input circuit breaker protection Alarm Battery back-up Beeping sound every 4 seconds when the input is cut off Battery low voltage Beeping sound every 1 seconds when the input is cut off Overload Continuously beeping sound when overload Battery Type Sealed,maintenance-free lead acid Capacity (12V,7AH)X1 (12V,7AH)X2 Recharge time 8 Hours to 90% of full capacity Back-up time Typical 20 min(Halfload) Battery protection Automatic self-test,discharge protection Communication interface RS232(port)(B) Bi-directional communication port(Compatible with Bpro500A/600A  Bpro-1000/1200a) Appearance Net weight 5.8kg 12kg Gross weight 6.1kg 12.5kg Size(mm)DxWxH 260x97x135 375x130x190 Outside Packing Weight 19kg 28.5kg Quantity 3 2 Size(mm)DxWxH 455x366x228 495x460x315 Remark Communication port: NO Specification only for reference . Subject to change without prior notice We accept order with special specifications