The Castle series On-line UPS is an advanced true double conversion On-line Topology, the Castle Isolated gate Bipolar Transistors (IGBT) for true isolation from AC input.  Ideal for Data Centers in network and Industrial applications. Features scalable battery packs for those critical business systems that require long run times.  With the Castle wide in-put voltage range and near zero tolerance on frequency and voltage variance on the put-put the Castle series is perfect for the most demanding and delicate of applications.

Sine-wave output:
True sine-wave output with less than 3% THD.

Double Conversion Design:
Zero transfer/ complete isolation of input AC.

UPS Monitoring Software:
Powerful true RS232 communication via the enclosed software
to manage and safely shutdown operating systems.

Network RJ45/11 protection:
Complete powerful network and phone line surge protection.

AC Surge Suppressor:
Powerful multi-stage surge components that exceed IEEE requirements.

SNMP Slot Option:
Allows for remote monitoring and control via www.

Sleep Mode:
Worry free battery management. The unit turns itself off after ten seconds to conserve battery
power when no power needs are detected.

Battery level indicators:
LED''s indicate battery levels.

Load Sensing:
The incorporated LED load indicators allow IT professionals to manage backup time and balance
power loads.

Low Battery indicators:
The low battery level indicator will warn of eminent UPS shutdown two full minutes before unit shuts
down.

Replace Battery indicators:
A preventative measure that indicates when batteries must be replaced to prevent
server crashes.


TECHNICAL SPECIFICATIONS:

Product Series		CASTLE
Model		C1K	C2K	C3K
Rated Power	VA/W	1kVA / 0.7kW	2kVA / 1.4kW	3kVA / 2.1kW
Input	Nominal Voltage	220VAC
	Voltage Range	115 ~ 300VAC
	Frequency Range	46~54Hz(default), user adjustable within 40~60Hz
	Power Factor	0.97
	Connection	IEC320-10A inlet		IEC320-16A inlet
Output	Voltage	220VAC ± 2%
	Frequency	46~54Hz or 50Hz ± 0.2Hz (Line mode) 50Hz ± 0.2Hz ( Battery mode)
	Waveform	Sine Wave
	Distortion	3%	4%
	Overload Capability	108%~150% for 30 sec., ³150% for 300 ms
	Current Crest Ratio	3:1
	Connections	IEC320 * 4	IEC320 * 6	IEC320 * 3 and Terminal Block
Battery	Type	Sealed, Maintenance free, Lead-Acid
	Quantity	3 pieces	8 pieces
	Back-up Time (Full load)	5 min	9 min	5 min
	Recharge Time	5 hrs to 90% of capacity after full load discharge
Bypass	Automatic Transfer	on overload and UPS failure
	Before UPS Power-on	Default “NO”, user adjustable to “YES”
	Voltage Range	80~264VAC (Default), user adjustable within 80~286VAC
Transfer Time		0 ms; less than 4 ms from inverter to bypass and vice versa
LED Indicators	Status	Load level / Battery level, Battery , Utility Power, Inverter, Bypass, Overload, Fault
Audible Alarm		Bypass, On battery mode, Battery low, Overload, Fault
Acoustic Noise	At 1 meter distance	45 dBA	50 dBA
Communications	DB-9 Port	RS-232 Serial Interface
	Intelligent Slot	Options: WebPower, AS400 Card or WinPower CMC
Network Surge Protection		RJ45 I/O port available for network or Fax/Modem
Environmental	Operating Temperature	0 ~ 40°C
	Operating Humidity	20 ~ 90% non-condensing
Weight	Net (Kg)	13	31.5	32
Dimensions	W x D x H (mm)	145 x 400 x 220	192 x 460 x 348

Model		C1KS	C2KS	C3KS
Rated Power	VA/W	1kVA / 0.7kW	2kVA / 1.4kW	3kVA / 2.1kW
Input	Nominal Voltage	220VAC
	Voltage Range	115 ~ 300VAC
	Frequency Range	46 ~ 54Hz(default), user adjustable within 40~60Hz
	Power Factor	0.97
	Connection	IEC320-10A inlet		IEC320-16A inlet
Output	Voltage	220VAC ± 2%
	Frequency	46~54Hz or 50Hz ± 0.2Hz (Line mode) 50Hz ± 0.2Hz ( Battery mode)
	Waveform	Sine Wave
	Distortion	3%	4%
	Overload Capability	108% ~ 150% for 30 sec., ³150% for 300 ms
	Current Crest Ratio	3:1
	Connections	IEC320-10A *4	IEC320-10A *6	IEC320-10A *3 and Terminal Block
Battery	Type	Sealed, Maintenance free, Lead-Acid
	Nominal DC Voltage	36VDC	96VDC
	Back-up Time	Depends on the capacity of the external battery bank
	Connection	External Battery Socket
Bypass	Automatic Transfer	On overload and UPS failure
	Before UPS Power-on	Default “NO”, user adjustable to “YES”
	Voltage Range	80 ~ 264VAC (Default), user adjustable within 80 ~ 286VAC
Transfer Time		0 ms; less than 4 ms from inverter to bypass and vice versa
LED Indicators	Status	Load level / Battery level, Battery , Utility Power, Inverter, Bypass, Overload, Fault
Audible Alarm		Bypass, On battery mode, Battery low, Overload, Fault
Acoustic Noise	At 1 meter distance	45 dBA	50 dBA
Communications	DB-9 Port	RS-232 Serial Interface
	Intelligent Slot	Options: WebPower, AS400 Card or WinPower CMC
Network Surge Protection		RJ45 I/O port available for 10 base-T network or Fax/Modem
Environmental	Operating Temperature	0 ~ 40°C
	Operating Humidity	20 ~ 90% non-condensing
Weight	Net (Kg)	7	13.5	14
Dimensions	W x D x H (mm)	145 x 400 x 220	192 x 460 x 348