MultiPower series is OffLine UPS specially designed for users of advanced workstations and network nodes. This series represents the latest R&D achievement, incorporates SMD technology, adopts a completely plastic case and is thus compact and light. A Motorola microprocessor is used as the controller which renders the product an intelligent UPS capable of self-protection and fault diagnosis. MT500 provides 5 outlets of AVR power supply with a combined load capacity of 800VA; MT1000 provides 6 outlets of AVR power supply with a combined load capacity of 1600VA. The device has the function of on-line voltage stabilization and automatically adjusts itself to maintain a power supply of stable voltage when the utility power is of extra high or low voltage. By adopting a relay contact communication interface, and working together with Santak WinPower software for power supply monitoring, the device enables user to check the UPS'' working status at any time. When the back-up power supply of the UPS is about to be fully consumed, the current files will be automatically saved, thus protecting the user from possible data loss. Meanwhile, in view of the increasingly popular application of networks, this series is specially equipped with the function of protecting the network connection from surges. By simply connecting the network with the UPS, user is then free from the worries of surge damage when surfing over the Net.

APPLICATION

PCs, Workstations, Critical network devices

KEY FEATURES

Wide Input voltage / Frequency range, Generator compatibility
Built-in AVR (Automatic Voltage Regulator)
Dedicated AVR with surge protection outlet
Surge protection port for network (RJ45) or Modem (RJ11)
DB-9 communication port
Sealed lead-acid, maintenance free battery

TECHNICAL SPECIFICATIONS:

Product Series MultiPower Model MT500/600 MT1000/1200 Rated Power Battery Power Backup (BPB) 500VA/300W 600VA/350W 1000VA/600W 1200VA/700W Auto Voltage Regulator (AVR) 300VA 600VA Input Nominal Voltage 220VAC Voltage Range 162~286VAC Nominal Frequency 50Hz ±5% Protection Non-Fuse Breaker (NFB) Output on Battery Voltage 220Vrms ±10% Frequency 50Hz ±1Hz Output on Mains A.V.R 176~266VAC Battery Type Sealed Lead-Acid, Maintenance free (Panasonic) Backup Time (Full/Half Load) 10 min / 18 min Recharge Time 4-6Hours max. Overload Capability   Line Mode BPB: 110% for 1 min, 130% immediate shutdown AVR: NFB Battery Mode BPB: 110% for 10 sec., 130% immediate shutdown LED indicators Type Red and Green LED Status Normal , Back up, Overload, Fault Audible Alarm Battery discharge Beeping sound every four seconds after utility power fails.  Every second if battery approaches final discharge Fault Continuous beeping sound Acoustic Noise At 1 meter distance < 45 dBA Output Receptacles Type IEC320 or NEMA5-15R BPB 3 pieces 4 pieces AVR 2 pieces Network Surge Protection Port RJ45 Connector Network (RJ45) or Fax/Modem (RJ11) compatible jacks Communications DB-9 Port Environmental Operating Temperature 0 ~ 40°C Relative Humidity 20% ~ 90% Non-condensing Weight Net/Gross (kg) 4.8/5.3 8.3/10 Dimensions W x D x H (mm) 108 x 252 x 171 125 x 380 x 208