The series LiFePO4 battery is fit for E-mobility, Energy Storage System, Defense & Security, telecom outdoor applications,renewable energy systems, and other harsh environment applications.
Lithium Iron Phosphate can be used in most applications that use Lead Acid, GEL or AGM type batteries.
Suitable applications include:
•Switching applications and more
High cycle life
4000 cycles @80% DoD for effectively lower total of ownership cost
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60°C.
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
•Do NOT short circuit, reverse polarity, crush or disassemble.
•Do NOT heat or incinerate.
•Do NOT immerse in any liquid.
•Store at 30~50% SOC. Recharging every 3 months is recommended. The storage area should be clean, cool, dry and ventilated.
|Nominal Voltage||25.6 V|
|Nominal Capacity||120 Ah|
|Capacity @ 20A||300 min|
|Resistance||≤40 mΩ @ 50% SOC|
|Self Discharge||<3% / Month|
|Recommended Charge Current||20A|
|Maximum Charge Current||100A|
|Recommended Charge Voltage||29.2V|
|BMS Charge Cut-Off Voltage||<31.2 V (3.9V/Cell)|
|Reconnect Voltage||>28.8 V (3.6V/Cell)|
|Balancing Voltage||<28.8 V (3.6V/Cell)|
|Maximum Batteries in Series||8 (*Consult MUST)|
|Maximum Continuous Discharge Current||100 A|
|Peak Discharge Current||200 A (3s)|
|BMS Discharge Cut-Off Current||300 A ±10 A (31ms)|
|Recommended Low Voltage Disconnect||22 V (2.75V/Cell)|
|BMS Discharge Cut-Off Voltage||>16.0 V (2s) (2.0V/Cell)|
|Reconnect Voltage||>20.0 V (2.5V/Cell)|
|Short Circuit Protection||250 ~ 500 μs|
|Certifications||CE (battery) UN38.3 (battery)|
UL1642 & IEC62133 (cells)
|Shipping Classification||UN 3480, CLASS 9|
|Dimension (L x W x H)||345 x 190 x 245 mm|
13.6 x 7.5 x 9.6″
|Approx. Weight||27.8 lbs (30kg)|
|Terminal Type||DIN POST|
|Terminal Torque||80 ~ 100 in-lbs (9 ~ 11 N-m)|
|Discharge Temperature||-4 ~ 131 ºF (-20 ~ 55 ºC)|
|Charge Temperature||-4 ~ 113 ºF (0 ~ 45 ºC)|
|Storage Temperature||23 ~ 95 ºF (-5 ~ 35 ºC)|
|BMS High Temperature Cut-Off||149 ºF (65 ºC)|
|Reconnect Temperature||131 ºF (55 ºC)|
|Heating Temperature Range||-4 to 41 ºF (-20 to 5 ºC)|
|Heating Time||Approximately 1 hour @ 7.5 A|
|BMS Heating Foil Cut-Off||158 ºF (70 ºC)|